TheCheck-LineTI-25Sisidealforthepersonthattestsafewdifferentmaterialsregularly

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：118

產品咨詢 13352927502

詳細介紹在線留言

The Check-Line TI-25S is ideal for the person that tests a few different materials regularly. The TI-25S contains 8 velocities of the most common materials (refer to complete list of Materials below) and two velocities that the user can set using a simple software program.

The tool's backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.

The Checkline TI-25S comes complete, ready to use, and is protected by our 5 year limited warranty.

Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
Measures from 0.025 to 6.000 inches (0.60 to 150.0 millimeters) switch to select English or metric units.
Four readings per second for single point measurements.
8 pre-set velocities and 2 custom velocities
Ability to change between velocities without the use of computer software
IP 65 Rated

Range in Steel	0.025-6.00" (0.60-150.0 mm) Will vary in other materials
Resolution	.001" (0.01 mm)
Velocity Range	0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec
Dimensions	2.5 W x 4.75 H x 1.25 D inches
Display	4? - Digit, 0.5" Backlit LCD
Probe	1/4", 7.5 MHz, actual wearface is 3/8" (10 mm) Probe P/N: T-102-3300
Cable	4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Temp. Limits	Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C Special high temperature probes are optionally available.
Battery Type	Two 1.5V alkaline or 1.2V NiCad AA cells.
Battery Life	Typically operates for 200 hours on alkaline and 130 hours on NiCad.
Weight	10 ounces (283 g)
Accessories Included	Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty	Gauge: 5 Years Probes: 90 Days

訂貨清單

The TI-25S is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, PC-based Software, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

配件

TICC-M Protective Holder for Most TI Series Gauges

CF12 Coupling Fluid - 12oz

V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)

T-102-3300 1/4" diameter, 7.5 MHz, dual element transducer (Standard Probe for TI-25S)

DATACOMM PC Program to download Custom #1 & Custom #2 calibrations to TI-25S (N-306-0010 cable must be ordered)

N-306-0010 6 foot RS232 Cable (DB-9 to Lemo 2 pin)

BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit

訂貨型號

TI-25S Ultrasonic Thickness Gauge Kit with T-102-3300 Probe

相關型號

TI-25M-UWM